Grease / oil × Carpet
How to remove grease / oil stains from carpet
This guide is for Carpet. It does not create separate pages for fresh, dried or set-in states.
Blot or lift the grease / oil first, then use the smallest amount of a cleaner labelled for carpet. Keep the surface rule in view: Use a clean white cloth and keep the carpet only as wet as the method requires. Blot rather than rub, and follow the carpet maker's care instructions.
Keep it simple.
- white paper towels
- white cloth
- carpet-safe product
- absorbent paper or cloth
- mild detergent or labelled degreaser
- clean rinse cloth
Act before it dries.
- Lift standing oil with an absorbent material; do not wipe it deeper. Use a clean white cloth and keep the carpet only as wet as the method requires. Blot rather than rub, and follow the carpet maker's care instructions.
- Apply the compatible detergent to the cleaning cloth or surface, not indiscriminately to a porous backing. Use a clean white cloth and keep the carpet only as wet as the method requires. Blot rather than rub, and follow the carpet maker's care instructions.
- Rinse or blot residue and dry fully. Use a clean white cloth and keep the carpet only as wet as the method requires. Blot rather than rub, and follow the carpet maker's care instructions.
Use less, check more.
- Remove any crusted residue without scraping the surface. Use a clean white cloth and keep the carpet only as wet as the method requires. Blot rather than rub, and follow the carpet maker's care instructions.
- Use a labelled product suited to the surface and follow its dwell-time instructions. Use a clean white cloth and keep the carpet only as wet as the method requires. Blot rather than rub, and follow the carpet maker's care instructions.
- Repeat only after the surface is dry and the finish still looks normal. Use a clean white cloth and keep the carpet only as wet as the method requires. Blot rather than rub, and follow the carpet maker's care instructions.
Work in this order.
- 01
Read the material or care label and test the method in an inconspicuous spot.
- 02
Remove excess grease / oil by blotting or lifting; do not spread it.
- 03
Apply only the carpet-compatible product or detergent called for by the source and label.
- 04
Rinse or blot away residue when the label or surface method calls for it, then dry fully and inspect.
- solvents near flame or poor ventilation
- over-wetting upholstery, carpet or a mattress
- strong degreasers on a finish without a patch test
- over-wetting the backing
- hard scrubbing that distorts the pile
- unlabelled solvents on wool, delicate or unknown fibers
- Use one cleaning product at a time. Never mix bleach or any disinfectant with another cleaner.
- Ventilate and use gloves or eye protection when the product label calls for them.
- If the finish, color, backing or odor changes, stop and use the maker or a professional cleaner.
If the grease / oil remains after one labelled treatment, do not escalate to a stronger household chemical by guesswork. Check the care guide for carpet or use a professional service.
Why this guide says that.
Grease / oil guidance was checked against the cited source and narrowed to the Carpet scope. Chemical combinations not required by the source were intentionally omitted.